$99.99
Product Description
Extrusion : Hot melt extrusion molding accumulation
Forming: Three-dimensional
Print Range :Indefinite
Spinning speed : Adjustable
Heating temperature in the range :160- 230 degrees Adjustable
Device operating voltage : 12V 3A
Nozzle :0.7 mm
Product packing list:
3D stereoscopic printing pen
12V 3A Power Adapter
3 free filaments 10g each
Instructions for operation:
1.Connect one of the end of the Power Adapter and AC power cord to socket. And connect the other end of the DC plug into the “Power” port on the end of the pen. You can see the yellow LED lights, indicating the device is powered and into servo standby model.
2.Press “Wire Feeding Button”，you can see stunning LED lights, indicating the device has entered the warm-up model, about 0.5-2 minutes later, when the red LED lights turns from red to blue, indicating the end of warm-up, the device is ready for normal operation.
3.Insert the filament into ” Wire Loading Hole”, meanwhile, you may use your another hand to press “Wire Feeding Button”, then supplies will be transported by the built-in motor, the tip end of the nozzle will spit gum,means you load successfully.
Warning:
1.Never touch the nozzle or the heat-generating components while operating.
2.If the device is not used more than five minutes, it will automatically goes to standby model.The “Indicator” show no light. To use it again, you need to press the “Wire Feeding Button”.
3.Children should use it under the tutelage of adult.
BORN FOR CREATIVITY-Quickly melt and cool the colored ABS filament to create stable and unique stucture. Whether hobbyist or professional, childrens or adults, everyone is able to enjoy writing and drawing in the air!
COMPACT AND EASY TO USE-Weighs only 63g with adjustable heating temperature from 320-446 °F. Plug in the power cable and wait less than 2 minutes to enjoy making your imagination to reality!
SMART EXTRUSION SPEED CONTROL- Adjustable speed at which the ink is squeezed out, making it a breeze to fine-tune your artwork and get all the details correct.
ABS FILAMENT-Comes in a wide range of colors, greater strength, flexibility, malleability and higher temperature resistance. Has a hot plastic smell due to its petroleum-based plastic. Begins to melt at 356 °F and works at 446 °F
1 YEAR WORRY-FREE WARRANTY-We stand behind our products and provide a 1-year warranty for every product we make to be free of manufacturer defect